Products

TJ-2030/TJ-3040

Pneumatic Gold Stamping and embossing machine

https://www.youtube.com/shorts/RdJ7MxezdaY

Brief introduction

By advanced heat printing tech and widely application for book front page, label and advertising, and plastic products and daily products, material can be from paper to leather and cotton.

Gold printing is kind of drying process and can be packing and transportation immediately after finishing processing,and printing board can be made of copper and Zink and silicon rubber .

The characteristic: it is controlled by temperature relay , and printing timing relay , and printing tape stepping feeding, and with pressure valve and throttle valve to control air cylinder pressure and speed, machine running can be by foot pedal and or manual push way.

Air cylinder by grease to do the lubrication no need oil cup.

FUNCTION/COUNT

1.button at the bottom line from left to right ：increase, minus, selection, clearance 

2.temperature setting : pressing left side first button of temperature  and then choose the temperature you need by up and down arrow key, and then push the Set for the temperature setting. The panel top line is showing the current temperature, and low line is the setting temperature, when top temperature is reached to the setting temperature and it can be start working.

TJ-2030/TJ-3040 Detailed information.pdf